2024 Land Pride RCF3684 Pull-Type

Call for Price

Key Features

Availability Brochure

Year2024

MakeLand Pride

ModelRCF3684 Pull-Type

Product Features

Description

The Land Pride RCF3684 Rotary Cutter is a brute among single-spindle cutters. It features a 190 HP gearbox capable of cutting heavy grass and weeds, row crop stubble, thick brush, and small trees up to 4" in diameter and has a cutting height range of 2" to 12". The RCF3684 features a smooth top design for easy cleaning, and all-welded deck for added strength, and a floating top hitch for a clean, even cut.

Specifications & Capacities

Machine weight: 2,104 lbs (954.4 kg) With hydraulic adjustment and front & rear single chain guards
Hitch Category: Pull-type with clevis
Cutting width: 84" (2.13 m)
Overall width: 90 1/2" (2.30 m)
Overall length: 130" (3.30 m)
Deck height (Bottom of deck to bottom of skid shoe): 13 3/8" (34.0 cm)
Cutting height: 2" - 12" (5.1 cm to 30.5 cm)
Cutting capacity: 4" (10.2 cm) Diameter
Recommended tractor horsepower: 50-190 HP (37.3-141.7 kw)
Gearbox: 1:1.21 Speed-up beveled gears, Cast iron housing, 1 3/4" (4.4 cm) - 20 spline input shaft and 2 3/8" (6.0 cm) output shaft
Power take-off Speed: 540 rpm
Gearbox lubricant: 80-90W oil
Deck construction: All welded deck
Gearbox oil capacity: 10 pints (4.73 L)
Deck material thickness: 3/16" (5 mm)
Side skirt material thickness: 1/4" (6 mm)
Stump jumper / blade holder: 3/16" (5 mm) Round dish shaped bolt-on stump-jumper with diamond shaped blade bar
Skid construction: Replaceable bolt on skid shoes
Blades (2): 1/2" x 4" (1.3 cm x 10.2 cm) Heat treated alloy steel free-swinging high lift - low friction
Blade bolts: Keyed with harden flat washers & locknuts
Blade tip speed: 14,369 fpm (73.0 mps)
Driveline: ASAE category 5 with 4-plate slip clutch
Driveline protection: 4 plate slip clutch
Transport axle: Cushioned shock absorption
Rear deck height adjustment options: Ratchet jack or hydraulic cylinder
Tailwheel: 4" x 8" x 21" Laminated tire with cast iron hub
Front guard Optional: Rubber belting, single chain guard or double chain guard
Rear Guard Optional: Single chain guard or double chain guard
Jack Stand: Jack stand on tongue of pull-type cutter
Pull type tongue weight: 894 lb. (405.5 kg)

Features

Surpassed rugged industry standards: All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI.
5 Year gearbox warranty: A rugged heavy built gearbox capable of handling heavy cutting applications. Shows Land Pride’s confidence in gearbox integrity.
Cat. 5 driveline with 4-plate slip-clutch: Slip-clutch driveline offers convenience for continual work.
Cat. II and III 3-point hitch options with Quick Hitch capability: Fits a wide variety of tractors. Quick Hitch provides for fast hook-up.
Dual position clevis type 3-point floating top link: Permits deck to follow the terrain for an even cut.
Lower clevis type 3-point hitch: Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor’s lower arms, vs. pulling on a single pin design.
Pull-type hitch option Fits older tractors without a top link and smaller tractors without enough lift capacity.
84" Cutting width: Wide cutting width, reduces cutting time in the field.
Heavy deck construction with 3/16" deck top & 1/4" side skirts: Strong heavy deck material for rugged use. Heavy side panels protects sides from debris being thrown against them from the blades.
Fully welded deck: Adds additional strength and deck integrity.
Round back design: Helps discharge grass better than enclosed or partially enclosed cutters.
13 3/8" Deck height: Allows cutter to handle heavy cutting conditions.
2" to 12" Cutting height: Provides for a wide range of cutting conditions.
High cutting capacity: Can cut brushy areas with saplings up to 4".
Skid shoes: Provides sidewall reinforcement and protection to bottom of sidewall.
1/2" x 4" Heat-treated free swinging blades: Free swinging protects from obstructions. Heat-treated offers longer life.
Splined blade bar hub: Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.
3/16" Plate stump jumper: Standard round stump jumper slides over stumps, rocks, and debris.
High blade tip speed: Ensures clean cut.
4" Dia. cutting capacity: Can aid in clearing brush.
Dual laminated tailwheels: Dual tailwheels offer greater stability in uneven terrain. Laminated material is long lasting in rough conditions. Can’t go flat.
1 1/2" Heavy-duty spindle on tailwheel (3-point cutter): Tailwheels take a beating, spindle gives the strength to protect tailwheel assembly.
Wheel bearings (Pull-type cutter): Tapered roller bearing in cast iron hub.
Optional guarding: Protect against flying debris.