2024 Land Pride RCF2760

Call for Price

Key Features

Availability Brochure

Year2024

MakeLand Pride

ModelRCF2760

Product Features

Description

The RCF2760 Rotary Cutters is a smooth top version of our RCR26 Series, offering the same great cut and ideal for grass, weeds, crops, brush and small trees up to 3 inches in diameter. These units come equipped standard with a 3/16" thick heavy-duty stump jumper and replaceable bolt-on skid shoes. Optional shields are available for the front and rear.

Features and Benefits

Surpassed rugged industry standards: All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI.
5 Year gearbox warranty: Shows our confidence in the gearbox integrity.
130 hp gearbox: A rugged heavy built gearbox capable of handling heavy cutting applications.
Gearbox Seal Protection: Gearbox bottom seal protection for longer bearing life.
Cat. 4 driveline with 4-plate slip-clutch: Slip-clutch driveline offers convenience for continual work.
Lower clevis type 3-point hitch: Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor's lower arms, vs. pulling on a single pin design.
Heavy 10 gauge deck with 1/4" side skirts: Can withstand more abuse than lighter gauge decks.
Fully welded deck: Adds additional strength.
Box tubing deck supports: Makes for a stronger rigid deck.
Round back design: Helps discharge grass better than enclosed or partially enclosed cutters.
11 1/4" Deck Height: Allows cutter to handle heavy cutting conditions.
1 1/2" to 12" Cutting height: Provides for a wide range of cutting conditions.
High cutting capacity: Can cut brushy areas with saplings up to 3".
Skid shoes: Provides sidewall reinforcement and protection to bottom of sidewall.
1/2" x 4" Heat-treated free swinging blades: Free swinging protects from obstructions. Heat-treated offers longer life.
Splined blade bar hub: Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.
3/16" Plate stump jumper: Standard round stump jumper slides over stumps, rocks, and debris.
High blade tip speed: 12,384 FPM Ensures clean cut.
Laminated tailwheel: Laminated material is long lasting in rough conditions.
4" x 15" Solid rubber tailwheel: Can't go flat.
1 1/2" Heavy-duty spindle on tailwheel: Tailwheels take a beating, spindle gives the strength to protect tailwheel assembly.
Driveline Holder: Keeps driveline up out of dirt. Easier hook up of driveline.
Optional Guarding: Protect against flying debris. Customer can choose to include single chain or rubber guarding on the front and single chain guarding on the back.

Specifications & Capacities

Machine Weight: 955 lbs (433.2 kg) With front and rear Single Chain Guards
Hitch Category: l or II with floating top linkage, Quick Hitch ready
Cutting Width: 60" (1.52 m)
Overall Width: 67" (1.70 m)
Overall Length: 109" (2.77 m)
Deck Height (Bottom of Deck to Bottom of Skid Shoe): 11 1/4" (28.6 cm)
Cutting Height: 1 1/2" - 12" (3.8 cm - 30.5 cm)
Cutting Capacity: 3" (7.6 cm) Diameter
Recommended Tractor: hp 35-130 hp (26.1-96.9 kw)
Power Take-Off Speed: 540 rpm
Gearbox: 540 rpm power take-off driven gearbox, 1:1.44 speed-up beveled gears, cast iron housing, 1 3/8" (3.5 cm) - 6 spline input shaft and 2" (5.1 cm) output shaft
Gearbox Lubricant: EP 80-90W oil
Gearbox oil Capacity: 7 pints (3.31 L)
Deck Construction: All welded deck
Deck Material Thickness: 10 Gauge (3.4 mm)
Side Skirt Material Thickness: 1/4" (6 mm)
Skid Construction: Replaceable bolt on skid shoes
Stump Jumper: 3/16" x 24" (0.5 cm x 61.0 cm), Round Pan
Blades (2): 1/2" x 4" x 25" (1.3 cm x 10.2 cm x63.5 cm) Heat treated alloy steel freeswinging high lift
Blade Bolts: Keyed with harden flat washers & locknuts.
Driveline: ASAE Category 4
Blade Tip Speed: 12,384 FPM (62.9 mps)
Driveline Protection: 4 plate slip clutch
Tailwheel Mount Assembly: Welded A-arm and caster fork with 360 degree swivel
Front Guard: Optional: Rubber Belting or Single Chain Guard
Tailwheel: 4.00" x 8" x 15" (10.2 cm x 20.3 cm x 38.1 cm) Laminated tire with cast iron hub and tapered roller bearings
Rear Guard: Single Chain Guard